2009 Evinrude 65 hp E-TEC WRL WRY Commercial Outboard Boat Motor Owners Manual

X STORAGE
SCRATCH REPAIR
OUTBOARD EXTERNAL FINISH
Surface  scratches on  the  upper  and lower     Your outboard’s upper and lower engine cov-
engine covers can be polished out  with buff-    ers  use molded-in color  technology, provid-
ing compound.
Treat affected areas using these steps:
ing  a  deep,  durable  gloss   with  maximum
ultraviolet (sunlight) protection.
The high gloss  finish will show polish  marks
when  viewed closely  in  certain light  condi-
tions. This glossing is NORMAL.
Periodically,  wash the  entire  boat and  out-
board with  soapy water and  apply a coat  of
automotive wax.  Leave the  engine cover  in
place when washing the outboard.
1)
2)
3)
Sand the affected area with 800-grit sand-
paper.
Wet sand the area with 1200-grit  sandpa-
per.
Using a  composite material  buffing com-
pound,  polish the  area, closely  following
the product directions.
IMPORTANT: When trailering your outboard,
DO  NOT cover  the  engine with  canvas—it
will  dull the  finish of  the  outboard’s engine
covers.
IMPORTANT:  Your Dealer  has the  profes-
sional materials to properly repair scratches.
Do   not  attempt   to   paint  over   marks  or
scratches  in  the   composite  material.  See
your Dealer to  repair any deep scratches  or
gouges.
SUBMERGED OUTBOARD
If your outboard has been under water, have
it serviced  immediately upon  recovery. If
immediate   service   is   unavailable,   resub-
merge it in fresh water to avoid prolonged ex-
posure to the atmosphere.
HULL FINISH
The  condition of  your  boat’s bottom  affects
performance. Marine growth or bottom  paint-
ing may reduce speed and fuel efficiency.
After submersion, all boat and engine electri-
cal, fuel, and oiling systems must be inspect-
ed for  signs of  water  intrusion. Your  Dealer
should perform this service.
For maximum  performance, keep  the boat’s
running surface clean  by rinsing it with  fresh
water and wiping  it dry. Apply Evinrude   anti-
corrosion spray to any surface subject to cor-
rosion, but avoid the anti-corrosion anode(s).
35
Product Specification
CategoriesBRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual
Document TypeBoat Motor Manual. Marine Operator's Engine Guide.
Tags, , ,
Model Year2009
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 58 pages
Document File TypePDF
Publisherevinrude.com
Wikipedia's PageEvinrude Outboard Motors
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website