Maintenance
been drained. If the oil is milky, water
is getting into the gear case which
can cause gear damage. Consult a
Yamaha dealer for repair of the lower
EMU29312
Inspecting and replacing anode(s)
Yamaha outboard motors are protected from
corrosion by sacrificial anodes. Inspect the
external anodes periodically. Remove scales
from the surfaces of the anodes. Consult a
Yamaha dealer for replacement of external
unit seals.
[ECM00711]
TIP:
For disposal of used oil, consult your
Yamaha dealer.
Put the outboard motor in a vertical po-
sition. Using a flexible or pressurized fill-
ing device, inject the gear oil into the
gear oil drain screw hole.
anodes.
ECM00720
NOTICE
5.
Do not paint anodes, as this would render
them ineffective.
TIP:
Recommended gear oil:
Hypoid gear oil SAE#90
Gear oil quantity:
Inspect ground leads attached to external
anodes on equipped models. Consult a
Yamaha dealer for inspection and replace-
ment of internal anodes attached to the pow-
er unit.
0.980
L (1.036 US qt, 0.862 Imp.qt)
ZMU01900
ZMU01901
6.
7.
Put a new gasket on the oil level plug.
When the oil begins to flow out of the oil
level plug hole, insert and tighten the oil
level plug.
Tightening torque:
9
Nm (0.9 kgf-m, 6.6 ft-lb)
Put a new gasket on the gear oil drain
screw. Insert and tighten the gear oil
drain screw.
ZMU03461
Tightening torque:
9
Nm (0.9 kgf-m, 6.6 ft-lb)
66
| Categories | Marine, Yamaha Outboard Manuals |
|---|---|
| Tags | Yamaha 150 |
| Model Year | 2007 |
| Download File |
|
| Language | English |
| Product Brand | Yamaha Motor. Yamaha Motor Corporation, USA - Support Customer Relations for US: 1-800-962-7926
Yamaha Boats: 1-800-962-7926 Yamaha Outboard Customer Relations: 1-866-894-1626 , Yamaha Outboard |
| Document File Type | |
| Publisher | yamaha-motor.com |
| Wikipedia's Page | Yamaha Motor Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)