2007 Johnson 9.9 15 hp EL4 4-Stroke Outboard Owners Manual

OIL
FUEL SYSTEM
Your 4-stroke engine requires oil in the crankcase.
Evinrude/Johnson    Ultra   4-Stroke    synthetic
blend oil is recommended for this outboard en-
gine. It allows for extended oil change intervals and
is best for high load applications. Evinrude/Johnson
Ultra 4-Stroke synthetic blend oil delivers ultra vis-
cosity stability, sludge protection, friction reducing
properties, and superior corrosion protection.
WARNING
If your motor is equipped with a quick-dis-
connect fuel hose, disconnect the fuel hose
from the motor and from the fuel tank when
the motor  is not  being used  for a period of
time. Disconnecting the hose will avert fuel
leaks in the hose or at the engine.
If Evinrude/Johnson Ultra 4-Stroke synthetic blend
oil   is   unavailable,   you    may   use   Evinrude®/
Johnson® 4-Stroke outboard oil. This oil provides
excellent wear and corrosion resistance under nor-
mal operating conditions. For your engine’s oil ca-
pacity, refer to Engine Specifications.
IMPORTANT: Fuel distribution hoses in the boat
must deliver fuel at the rate of flow needed by the
engine.  Minimum  inside  diameter  of  fuel  hoses
must be 5/16 in. (8 mm).
IMPORTANT: Failure to follow this recommenda-
tion could void the engine warranty if a lubrication-
related failure occurs.
Fuel systems with built-in tanks, particularly those
that  include   antisiphon   valves  and   filter/primer
units, may have restrictions that will not allow the
engine fuel pump to deliver sufficient fuel under all
conditions. This can result in a loss of performance
and  possible  engine  damage.  If  a  performance
problem exists, see your Dealer.
ADDITIVES
IMPORTANT: Only use fuel additives approved by
BRP for your outboard. Use of other fuel additives
can result in poor performance or engine damage.
To avoid difficulty when restarting, never    run  the
engine with the fuel hose disconnected, or run the
engine out of fuel.
Evinrude/Johnson 2+4 fuel conditioner will help
prevent gum and varnish deposits from forming in
fuel system components and will remove moisture
from the fuel system. It can   be used continuously
and should be used during any period when your
engine is not being operated on a regular basis. Its
use will reduce spark plug fouling, fuel system icing,
and fuel system component deterioration.
Fuel and Oil - 19
Product Specification
CategoriesBRP Brand Manuals, Johnson 4-Stroke Manuals, Johnson Brand Manuals, Johnson Outboard Manuals
Tags, ,
Model Year2007
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 56 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website