Product Information
SPECIFICATIONS
200,
225, 250 Models
Displacement
Engine Type
200.1 cu. in. (3279 cc)
90° V, 6 Cylinder, Two-Cycle, E-TEC
200 HP – 4500 to 5800 RPM
Full Throttle Operating
Range
225
250
HP – 4500 to 5800 RPM
HP – 4500 to 5800 RPM
Power(1)
200 HP – 200 HP (149.1 kw) @ 5150 RPM
225
250
HP – 225 HP (167.8 kw) @ 5150 RPM
HP – 250 HP (186.4 kw) @ 5150 RPM
Idle RPM in Gear(2)
Idle RPM in Neutral(2)
Ignition Timing(2)
500 ± 50
500 ± 50
Controlled by the outboard’s EMM
Emission Control System: ECM, E-TEC (Engine Control Module, E-TEC)
per SAE J1930(2)
Fuel Requirements(2)
87 Pump Posted AKI (90 RON) – Refer to Oil and Fuel on
page 17
Oil – Lubricant
Evinrude/Johnson XD100 oil or TC-W3RL NMMA-certified oil
–
Refer to Oil and Fuel on page 17
Warning Signals
Controlled by the outboard’s EMM
Battery, Minimum(3)(4)
675 CCA (845 MCA) 12 volt or
750
CCA (940 MCA) 12 volt below 32°F (0°C)
Spark Plug(2)
Refer to ECI Label
(1)
(2)
(3)
(4)
Rated following the standards of ICOMIA 28.83, ISO 3046 and NMMA.
Emission Control Information.
Use a 750 CCA (940 MCA) battery when operating in temperatures below 32°F (0°C).
Under extraordinary electrical load or environmental conditions, use a 107 amp-hour minimum battery
(generally available in group 29 size).
46
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 200 hp, Evinrude 225 hp, Evinrude 250 hp, Evinrude CX, Evinrude CZ, Evinrude HL, Evinrude PL, Evinrude PX, Evinrude PZ, Evinrude SL |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)