2006 Johnson 3.5 hp R 2-Stroke Outboard Owners Manual

FUEL AND OIL
FUEL
Minimum Octane
Inside the U.S.
87 (R+M)/2 AKI
90 RON
WARNING
Outside the U.S.
Gasoline is extremely flammable and highly
explosive  under  certain  conditions.  Follow
the  instructions  in   this  section  explicitly.
Improper  handling  of  fuel  could  result  in
property damage, serious injury, or  death.
Your outboard has been designed to operate using
the above fuels; however, be   aware of the follow-
ing:
The boat’s fuel system may have different require-
ments regarding the use of alcohol fuels. Refer to
the boat’s Operator’s Guide.
Always turn off the engine before fueling.
Never permit anyone other than an adult to
refill the fuel tank.
Alcohol attracts and holds moisture that can cause
corrosion of metallic parts in the fuel system.
Do not fill the fuel tank all the way to  the top
or fuel may overflow when it expands due to
heating by the sun.
Alcohol-blended  fuel   can  cause   engine  perfor-
mance problems.
IMPORTANT: Always use fresh gasoline. Gasoline
will oxidize and weather; the result is loss of octane,
volatile compounds, and the production of gum and
varnish deposits which can damage the outboard.
Remove  portable  fuel  tanks from  the  boat
before fueling.
Always wipe up any fuel spillage.
Do  not   smoke,  or  allow   open  flames  or
sparks,  or  use  electrical  devices  such  as
cellular phones in the vicinity of a fuel leak
or while fueling.
WARNING
Leaking fuel is a fire and explosion hazard.
All   parts  in   the   fuel  system   should   be
inspected  frequently  and  replaced  if  signs
of   deterioration    or   leakage   are    found.
Inspect   the  fuel   system   each   time  you
refuel,  each  time  you  remove   the  engine
cover, and annually.
Always work in a well ventilated area.
Your outboard is certified to operate on unleaded
automotive gasoline with an octane rating equal to
or higher than that specified in Minimum Octane
chart. When using gasoline that contains MTBE or
alcohol, follow these guidelines:
OIL
Using unleaded gasoline that contains   methyl ter-
tiary butyl ether (MTBE) is acceptable  ONLY if the
MTBE content does not exceed 15% by volume.
Evinrude/Johnson XD25™ formula outboard oil
is recommended for your outboard.
It contains a
richer additive package than other TC-W3 oils, min-
imizing  carbon  build-up  and  deposits  on  pistons
and bearing surfaces. It provides 25% greater de-
tergency than minimum TC-W3 requirements.
Using alcohol-extended fuels is acceptable ONLY if
the alcohol content does not exceed:
10% ethanol by volume; or
Evinrude/Johnson brand oils are formulated to give
best  engine  performance  while  controlling  piston
and combustion chamber deposits, providing supe-
rior lubrication and ensuring maximum spark plug
life.
5% methanol with 5% cosolvents by volume
If Evinrude/Johnson XD25 formula outboard oil is
not available, you must use an NMMA-certified TC-
W3 oil such as Evinrude/Johnson direct injection oil
or Evinrude biodegradable outboard oil.
IMPORTANT: Failure to follow this recommenda-
tion could void the engine warranty if a lubrication-
related failure occurs.
Fuel and Oil - 13
Product Specification
CategoriesJohnson 2-Stroke Manuals, Johnson Outboard Manuals
Tags,
Model Year2006
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 48 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website