3)
Hold a suitable container under the oil drain
screw. Remove the screw and drain the re-
servior. Before you reinstall the screw, re-
place the gasket with a new one. Reinstall the
screw and tighten it securely.
ADJUSTMENTS
Throttle Friction
Adjust throttle friction on your remote control to
maintain its position and prevent unwanted throttle
“creep” under normal operating conditions.
To adjust, start engine and move control handle
into FORWARD throttle range. While underway,
turn adjustment knob clockwise to increase friction.
The friction adjustment is effective only in the
FORWARD throttle range.
1
1. Oil drain screw
4)
Pour the recommended oil into the oil fill until
it reaches the upper mark on the dipstick. Re-
fer to Engine Specifications for crankcase
capacity.
1
5)
Replace the oil fill cap and clean any spilled
oil off the engine and your skin.
6)
7)
Reinstall the upper cover.
1. Throttle friction control
Supply water to the cooling system and run
the engine at idle to check for leaks, especial-
ly around the oil filter, drain screw and oil fill
cap. Correct any problems.
See your Dealer for throttle friction adjustments on
your specific remote control.
8)
Stop the engine and recheck crankcase oil
level using the dipstick. Add oil as indicated.
3
1
2
1.
2.
3.
Oil fill cap and dipstick
Add
Full
Dispose of used oil in a reasonable manner follow-
ing all local regulations.
Maintenance - 37
| Categories | Johnson 4-Stroke Manuals, Johnson Outboard Manuals |
|---|---|
| Tags | Johnson 25 hp, Johnson E4, Johnson EL4 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)