2005 Yamaha Outboard V150D Boat Owners Manual

Maintenance
4.
Reinstall  the filter  element  in  the cup.
Make sure the O-ring is in position in the
the boat is tightly moored.
NOTE:
cup. Firmly screw the cup  onto the filter    Correct idling speed inspection is only possi-
housing.
ble if  the  engine is  fully warmed  up. If  not
5.
6.
Attach the filter assembly to the bracket     warmed up fully, the idle speed will measure
so that the fuel hoses are attached to the   higher than normal. If you have difficulty ver-
filter assembly.
Run the engine and check  the filter and    quires adjustment, consult a Yamaha dealer
lines for leaks.
or other qualified mechanic.
ifying the  idle  speed, or  the idle  speed re-
EMU29040
Inspecting idling speed
2.
Verify whether  the idle  speed  is set  to
specification.  For idle  speed  specifica-
tions, see page 40.
EWM00450
WARNING
EMU29050
Checking water in engine oil tank
Oil injection models
There is a water trap at the bottom of the en-
gine oil tank. If water or foreign matter is vis-
ible in this trap, consult your Yamaha dealer.
q
q
Do not touch or remove electrical parts
when starting or during operation.
Keep  hands,  hair,   and  clothes  away
from  the  flywheel  and  other  rotating
parts while the engine is running.
2-hp   models:   The   propeller   rotates
whenever the engine is running. Do not
move the throttle control lever from the
start position during warm-up. The boat
q
could
unexpectedly   start   to   move,
which could result in an accident.
2
ECM00490
CAUTION:
1
This procedure must be performed  while
the  outboard  motor  is  in  the  water.  A
flushing attachment  or  test tank  can be
used.
ZMU01895
1.
2.
Water trap
Engine oil tank
A diagnostic tachometer should  be used for
this procedure. Results may vary depending
on  whether  testing  is  conducted  with  the
flushing attachment, in a test tank, or with the
outboard motor in the water.
EMU29111
Checking wiring and connectors
q
Check that each grounding wire is properly
secured.
q
Check that each connector is engaged se-
curely.
1.
Start the engine and allow it to warm up
fully in neutral until it is running smooth-
ly.
2-hp
model: Warm  the engine  with the
throttle in the start position or less. If the
outboard is mounted on a boat, be  sure
51
Product Specification
CategoriesYamaha Outboard Manuals
Document TypeBoat Motor Manual Free Download. Marine Operator's Boating Guide.
Tags
Model Year2005
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 81 pages
LanguageEnglish
Product BrandYamaha Motor. Yamaha Motor Corporation, USA - Support Customer Relations for US: 1-800-962-7926
Yamaha Boats: 1-800-962-7926
Yamaha Outboard Customer Relations: 1-866-894-1626 , Yamaha Outboard
Document File TypePDF
Publisheryamaha-motor.com
Wikipedia's PageYamaha Motor Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website