2005 Yamaha Outboard V150D Boat Owners Manual

Maintenance
NOTE:
mandatory to prevent  excessive engine
damage due  to rust. Perform the  flush-
ing and fogging at the same time.
The use  of  Yamaha Fuel  Conditioner and
Stabilizereliminates  the need  to drain  the
fuel system. Consult your Yamaha dealer or
other qualified mechanic if the fuel system is
to be drained instead.
EWM00090
WARNING
q Do not touch or remove electrical parts
when starting or during operation.
3.
4.
Remove  the  top  cowling  and  silencer
cover/cap. Remove the propeller.
Install the  flushing attachment over  the
cooling water inlet.
q
Keep  hands,  hair,   and  clothes  away
from  the  flywheel  and  other  rotating
parts while the engine is running.
6.
7.
Run the  engine at a fast  idle for 1015
minutes in neutral position while supply-
ing fresh water.
Just prior to turning off the engine, quick-
ly   spray   Yamaha   Stor-Rite   Engine
Fogging Oil(Part  No. LUB-STRRT-12-
ECM00300
CAUTION:
Do not run  the engine without supplying
it  with cooling  water.  Either  the engine
water pump  will  be damaged  or the  en-
gine will  be  damaged from  overheating.
Before  starting  the  engine,  be  sure  to
supply water to the cooling water passag-
es.
00)
alternately   into  each   carburetor/
each  intake  manifold.   When  properly
done, the engine will smoke excessively
and almost stall.
Remove  the  flushing   attachment  and
wipe off any excess water.
ECM00310
CAUTION:
8.
9.
Avoid running the outboard motor at high
speed while  on the flushing  attachment,
otherwise overheating could occur.
Install  the  silencer  cover/cap  and  top
cowling. Install the propeller.
NOTE:
A flushing attachment is available from  your
Yamaha dealer.
EMU28410
Lubrication (oil injection models)
1.
Grease the  spark plug  threads and  in-
stall  the  spark  plug(s)   and  torque  to
proper specification. For  information on
spark plug installation, see page 48.
Fill the  oil tanks. This  prevents the  for-
mation of condensation. For models with
a remote oil tank, it may be necessary to
manually  override  the   control  unit  to
completely fill the engine oil tank.
2.
1
. Flushing attachment
5.
Cooling system  flushing  is essential  to
prevent  the cooling  system  from  clog-
ging up  with salt, sand,  or dirt. In  addi-
tion, fogging/lubricating of  the engine is
3.
Change  the  gear  oil. For  instructions,
see page 55. Inspect the oil for the pres-
42
Product Specification
CategoriesYamaha Outboard Manuals
Document TypeBoat Motor Manual Free Download. Marine Operator's Boating Guide.
Tags
Model Year2005
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 81 pages
LanguageEnglish
Product BrandYamaha Motor. Yamaha Motor Corporation, USA - Support Customer Relations for US: 1-800-962-7926
Yamaha Boats: 1-800-962-7926
Yamaha Outboard Customer Relations: 1-866-894-1626 , Yamaha Outboard
Document File TypePDF
Publisheryamaha-motor.com
Wikipedia's PageYamaha Motor Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website