2005 Yamaha Outboard F4D Boat Motor Owners Manual

Maintenance
when starting or during operation.
Keep  hands,  hair,   and  clothes  away
from  the  flywheel  and  other  rotating
parts while the engine is running.
q
7.
8.
Run the  engine at a fast  idle for 1015
minutes in neutral position.
Just prior to turning off the engine, quick-
ly   spray   Yamaha   Stor-Rite   Engine
Fogging Oil(Part  No. LUB-STRRT-12-
00)
alternately  into each  carburetor  or
1.
2.
Water surface
Lowest water level
the fogging hole of the  silencer cover, if
equipped. When properly  done, the en-
gine will smoke  excessively and almost
stall.
Remove  the  outboard  motor from  the
test tank.
Drain the  cooling water  completely out
of the motor. Clean the body thoroughly.
Install  the  silencer  cover/cap  and  top
cowling.
5.
Fill the tank with fresh water to above the
level of the anti-cavitation plate.
9.
ECM00300
CAUTION:
10.
11.
Do not run  the engine without supplying
it  with cooling  water.  Either  the engine
water pump  will  be damaged  or the  en-
gine will  be  damaged from  overheating.
Before  starting  the  engine,  be  sure  to
supply water to the cooling water passag-
es.
EMU28400
Lubrication (except oil injection
models)
1.
Grease the  spark plug  threads and  in-
stall  the  spark  plug(s)   and  torque  to
proper specification. For  information on
spark plug installation, see page 40.
Change  the  gear  oil. For  instructions,
see page 46. Inspect the oil for the pres-
ence of water that indicates a leaky seal.
Seal replacement  should be performed
by an authorized Yamaha dealer prior to
use.
ECM00290
CAUTION:
If the fresh  water level is below  the level
of the anti-cavitation plate, or if the water
supply is insufficient, engine seizure may
occur.
2.
6.
Cooling system  flushing  is essential  to
prevent  the cooling  system  from  clog-
ging up  with salt, sand,  or dirt. In  addi-
tion, fogging of the engine is mandatory
to  prevent  excessive   engine  damage
due  to  rust.  Perform the  flushing  and
fogging at the same time.
3.
Grease all grease fittings. For further de-
tails, see page 40.
EMU28420
Cleaning and anticorrosion
measures
Wash down the exterior of the outboard
motor with fresh water  and dry off com-
pletely.
EWM00090
1.
WARNING
q
Do not touch or remove electrical parts
37
Product Specification
CategoriesYamaha Outboard Manuals
Document TypeBoat Motor Manual Free Download. Marine Operator's Boating Guide.
Tags
Model Year2005
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 68 pages
LanguageEnglish
Product BrandYamaha Motor. Yamaha Motor Corporation, USA - Support Customer Relations for US: 1-800-962-7926
Yamaha Boats: 1-800-962-7926
Yamaha Outboard Customer Relations: 1-866-894-1626 , Yamaha Outboard
Document File TypePDF
Publisheryamaha-motor.com
Wikipedia's PageYamaha Motor Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website