135, 150, 175 Models
Displacement
Engine Type
158 cu. in. (2589 cc)
60° V, 6 Cylinder, Two-Cycle,
Direct Injection
Full Throttle Operating Range
Power (1)
135, 150 - 4750 to 5250 RPM
175 - 5250 to 5750 RPM
135 - 135 HP (100.7 kw) @ 5000 RPM
150 - 150 HP (111.9 kw) @ 5000 RPM
175 - 175 HP (130.5 kw) @ 5500 RPM
Idle RPM in Gear (2)
Ignition Timing (2)
650 ± 50
Not Adjustable
Emission Control System:
per SAE J1930 (2)
ECM, DFI (Engine Control Module, Direct Fuel Injection)
Fuel Requirements (2)
87 Pump Posted AKI (90 RON) - Refer to Fuel and Oil
Evinrude Direct Injection oil - Refer to Fuel and Oil
Controlled by the engine’s EMM
Oil
Warning Signals
Battery, Minimum
675 CCA (845 MCA) 12 volt
OR 107 amp-hour (5)(6)
Spark Plug (2)(3)
Torque
Refer to ECI Labels
15-22 ft. lbs. (20-30 N·m)
Start Assist Circuit Fuse
Fuses
Evinrude P/N 514768
Refer to Power Distribution Panel
Evinrude P/N 502906
Fuel Filter
Alternator
35-Amp, Fully Regulated
Gearcase - Lubricant
Capacity
Evinrude Ultra-HPF™ gearcase lubricant
40 fl. oz. (1190 ml) Counter Rotation
44 fl. oz. (1300 ml) Standard Rotation
Pwr. Trim/Tilt - Fluid Capacity
Propeller (4)
21 fl. oz. (622 ml)
Refer to Propeller Selection
Weight (7)
L Models - 423 lbs. (192 kg)
X Models - 443 lbs. (201 kg)
Sound at Driver’s Ear
(LpA) ICOMIA 39.94
78.2 dB(A)
Transom Height
L Models - 19 1/2 to 20 in. (495 to 508 mm)
X Models - 24 1/2 to 25 in. (622 to 635 mm)
General Information - 15
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 100 hp, Evinrude 115 hp, Evinrude 135 hp, Evinrude 150 hp, Evinrude 175 hp, Evinrude 200 hp, Evinrude 225 hp, Evinrude 250 hp, Evinrude Direct Injection, Evinrude FCX, Evinrude FCZ, Evinrude FHL, Evinrude FPL, Evinrude FPX, Evinrude FPZ, Evinrude FSL |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)