ENGINE SPECIFICATIONS
100, 115 Models
Displacement
Engine Type
105.4 cu. in. (1726 cc)
60° V, 4 Cylinder, Two-Cycle,
Direct Injection
Full Throttle Operating Range
Power (1)
100, 115 - 5250 to 5750 RPM
100 - 100 HP (74.6 kw) @ 5500 RPM
115 - 115 HP (85.8 kw) @ 5500 RPM
Idle RPM in Gear (2)
Ignition Timing (2)
650 ± 50
Not Adjustable
Emission Control System:
per SAE J1930 (2)
ECM, DFI (Engine Control Module, Direct Fuel Injection)
Fuel Requirements (2)
87 Pump Posted AKI (90 RON) - Refer to Fuel and Oil
Evinrude direct injection oil - Refer to Fuel and Oil
Controlled by the engine’s EMM
Oil
Warning Signals
Battery, Minimum
Spark Plug (2)(3)
500 CCA (620 MCA) 12 volt
Refer to ECI Label
Torque
15-22 ft. lbs. (20-30 N·m)
Start Assist Circuit Fuse
Fuses
Evinrude P/N 514768
Refer to Power Distribution Panel
Evinrude P/N 502906
Fuel Filter
Alternator
35-Amp, Fully Regulated
Gearcase - Lubricant
Capacity
Evinrude Ultra-HPF™ gearcase lubricant
L Models - 26 fl. oz. (770 ml)
X Models - 42 fl. oz. (1250 ml)
Pwr. Trim/Tilt - Fluid Capacity
Propeller (4)
21 fl. oz. (622 ml)
Refer to Propeller Selection
Weight (7)
L Models - 365 lbs. (166 kg)
X Models - 390 lbs. (177 kg)
Sound at Driver’s Ear
(LpA) ICOMIA 39.94
80.8 dB(A)
Transom Height
L Models - 19 1/2 to 20 in. (495 to 508 mm)
X Models - 24 1/2 to 25 in. (622 to 635 mm)
14
- General Information
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 100 hp, Evinrude 115 hp, Evinrude 135 hp, Evinrude 150 hp, Evinrude 175 hp, Evinrude 200 hp, Evinrude 225 hp, Evinrude 250 hp, Evinrude Direct Injection, Evinrude FCX, Evinrude FCZ, Evinrude FHL, Evinrude FPL, Evinrude FPX, Evinrude FPZ, Evinrude FSL |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)