Disengage
Flip up shallow-water drive lever.
Move tilt/run lever to the RUN position.
2
1
1
1.
Shallow-water drive lever
1.
2.
Tilt/run lever – RUN position
NEUTRAL
Slowly, lower motor to normal operating position.
Grasp tilt grip on engine cover and tilt motor slightly.
CARRYING AND TRANSPORTING
Before you shut the engine off for the last time dur-
ing your outing, close the fuel shut-off valve and the
fuel tank vent screw. Run the engine until it quits.
Doing so will minimize the potential for fuel leakage
when you lay the engine down.
1
After removing the engine from the boat, hold it up-
right until the cooling system stops draining before
you lay it down for carrying.
IMPORTANT: Whenever the engine is horizontal,
keep its powerhead higher than the gearcase. Oth-
erwise, any water remaining in the exhaust passag-
es could run into the block and cause serious
damage.
1.
Tilt grip
When transporting, rest the engine on its side on a
padded surface.
Operation - 25
| Categories | BRP Brand Manuals, Johnson 2-Stroke Manuals, Johnson Brand Manuals, Johnson Outboard Manuals |
|---|---|
| Tags | Johnson 6 hp, Johnson 8 hp, Johnson R, Johnson RL |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)