2011 Evinrude 65 hp E-TEC WRL WRY Commercial Outboard Boat Motor Owners Manual

   Using Your E-TEC Outboard
SPECIAL OPERATING CONDITIONS
SALT WATER
environmental conditions. See your Dealer for
replacement anodes.
Upon removal from salt water, leave outboard
in a  vertical position  until its  cooling system
has drained. During long periods  of mooring,
tilt the  gearcase out  of  the water,  except in
freezing temperatures. Flush  the outboard, if
desired. Refer to  Outboard External Finish
on page 38.
Salt Water Lubrication Points
Galvanic corrosion destroys underwater met-
al parts and  can occur in fresh  or salt water;
however, salt,  brackish, and  polluted waters
will accelerate corrosion.
Metal-based antifouling  paint on  the boat  or
outboard and  the use of improperly  installed
shore power in the area of  your moored boat
will also accelerate corrosion.
1
1.
Trailering bracket and swivel bracket lubrica-
tion points (annually)
IMPORTANT:  NEVER  paint  the anode,  its
fasteners,  or its  mounting  surface.  Painting
will reduce its corrosion protection.
WEEDY WATER
Weeds block  water  intakes and  may  cause
your outboard to overheat. Weeds on the pro-
peller create vibration and reduce boat speed.
When operating in  weedy water, run  at slow
speeds and in  REVERSE frequently to  clear
weeds from  the propeller and  water intakes.
Check the water pump indicator often.
If REVERSE  operation does  not clear  away
weeds,   SHUT  OFF   the  engine.   Remove
weeds from propeller area and  water intakes
before operating at higher speed.
1.
Tilt tube lubrication points (annually)
Anti-Corrosion Anodes
Your outboard is  equipped with one or  more   SHALLOW WATER
anodes that protect it from galvanic corrosion.
Gearcase damage can occur  if the gearcase
Disintegration of the anode  is normal and in-
dicates it is working. Check each anode peri-
odically.  Replace  anodes  smaller  than  2/3
is allowed  to drag  on the  waterway  bottom.
Use caution when operating in shallow water.
their original size.  Additional anodes may be    Impact damage  is NOT  covered by  the out-
required depending on engine application and  board warranty.
30
Product Specification
CategoriesBRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual
Document TypeBoat Motor Manual. Marine Operator's Engine Guide.
Tags, , ,
Model Year2011
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 72 pages
Document File TypePDF
Publisherevinrude.com
Wikipedia's PageEvinrude Outboard Motors
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website