2011 Evinrude 65 hp E-TEC WRL WRY Commercial Outboard Boat Motor Owners Manual

   Using Your E-TEC Outboard
OIL AND FUEL
OIL REQUIREMENTS
OILING SYSTEM
Evinrude/Johnson Brand Oils
If  the “LOW  OIL”  warning  light illuminates,
you have approximately five hours of normal
operation before running out  of oil. Refill the
oil tank at next convenient opportunity.
deposits, providing  superior lubrication,  and    Always  “top  off” your  oil  tank  prior to  pro-
longed usage or long trips.
Evinrude/Johnson outboard oils are formulat-
ed  to  give  best  engine performance  while
controlling  piston and  combustion  chamber
ensuring maximum spark plug life.
The following outboard oils  are recommend-    New outboards are programmed to use addi-
ed for use in your Evinrude E-TEC outboard:    tional  oil during the first  two hours of opera-
tion above 2000 RPM.
Evinrude/Johnson XD100;
Evinrude/Johnson XD50; or
Evinrude/Johnson XD30.
Refer to Engine Overheating on page 29.
NOTICE
When operating in conditions
Evinrude/Johnson
XD100 oil must be used.
Evinrude/Johnson XD100 Oil
under
32°F
(0°C),
Evinrude/Johnson XD100  oil is  preferred
for  your Evinrude  E-TEC  outboard.  This
synthetic   formula  oil   provides  uncompro-
mised lubrication and  superior performance,
even  in  extreme   conditions—especially  in
cold temperatures down to 0°F (-17°C).
If requested,  an authorized  dealer can  pro-
gram  your Evinrude  E-TEC  outboard EMM
for  the  exclusive  use of  Evinrude/Johnson
XD100. Only an authorized Evinrude deal-
er can program your outboard for this op-
tional benefit.
Always keep an extra supply of outboard oil in
the boat. Refer to Oil Requirements on page
16.
If you run the oil tank  empty, you MUST refill
the oil  tank and  prime the oil  system before
using  the  engine.  Refer  to  Filling  the  Oil
Tank on page  17 and Priming  the Oil Sys-
tem on page 16.
Priming the Oil System
Oil consumption is reduced if the outboard is
programmed for  exclusive use  of   Evinrude/
Johnson XD100 as compared to using a con-   The  oiling  system MUST  be primed  before
ventional oil.
using the outboard if:
The outboard is new (Oil system MUST be
primed);
You run completely out of oil; or
IMPORTANT: If  your EMM  has been pro-
grammed  for  Evinrude/Johnson  XD100,
DO NOT use any other oil unless in an emer-
gency. If Evinrude/Johnson XD100 is tempo-    •  The outboard is laid down for transportation
rarily unavailable, a one-time-only use of an
or storage.
oil  that  meets   NMMA  TC-W3  certification    Prime the oiling system by performing Long-
standards is allowed. If you discontinue using   Term Storage (Winterization) on page 40.
Evinrude/Johnson XD100, you MUST first re-
turn to your  Dealer to have  the EMM repro-
grammed back to the original factory setting.
Other Oils
If Evinrude/Johnson brand oils are  not avail-
able, you must use  an oil that meets NMMA
TC-W3 certification standards.
IMPORTANT: Failure to  follow oil specifica-
tions could void the engine warranty if a lubri-
cation-related failure occurs.
16
Product Specification
CategoriesBRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual
Document TypeBoat Motor Manual. Marine Operator's Engine Guide.
Tags, , ,
Model Year2011
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 72 pages
Document File TypePDF
Publisherevinrude.com
Wikipedia's PageEvinrude Outboard Motors
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website