2008 Evinrude 75 90 hp E-TEC PL PX SL WEL WEX Outboard Boat Motor Owners Manual

X PRODUCT WARRANTY  INFORMATION
4. WARRANTY COVERAGE PERIOD
This limited warranty will be in effect from the date of delivery to the first retail consumer or the date the
Product is first put to use, whichever occurs first, for a period of:
THIRTY-SIX (36) CONSECUTIVE MONTHS for private, recreational use; or
TWELVE (12) CONSECUTIVE MONTHS for commercial use, except that emission-related components
providing input to emission controls (e.g. sensors) are warranted for twenty-four (24) months or two hun-
dred (200) hours of engine use, whichever occurs first. The Product is used commercially when it is used
in connection with any work or employment that generates income, during any part of the warranty period.
The Product is also used commercially when, at any point during the warranty period, it is installed on a
boat that has commercial tags or is licensed for commercial use.
In cases where the delivery date is not established to BRP’s satisfaction, the date of sale will be used to
determine the warranty start date.
The repair or replacement of parts or the performance of service to Product under this warranty does not
extend the life of this limited warranty beyond its original expiration date. All Evinrude/Johnson® Genuine
Parts and accessories installed by an authorized dealer at the time of sale, including but not limited to pro-
pellers, bear the standard BRP parts and accessories one-year limited warranty.
California residents who purchased or warranty-registered a Product in California should refer to BRP’s
California Emissions Control Warranty Statement.
5. CONDITIONS TO HAVE WARRANTY COVERAGE
This warranty coverage is available only on  Evinrude outboard engines purchased as new and unused
from a dealer authorized to distribute Evinrude products in the country in which the sale occurred (“Deal-
er”), and then only after the BRP specified pre-delivery inspection process has been completed and doc-
umented  by  the  purchaser   and  Dealer.  Warranty  coverage  only  becomes   available  upon  proper
registration of Product by Dealer or owner.
Only the original purchaser and any subsequent owners who reside in the United States and Canada and
have purchased Product from a U.S. or Canadian Dealer are eligible for warranty registration and warran-
ty coverage hereunder. Such limitations are necessary in order to allow BRP to protect the safety of its
products, its consumers, and the general public.
As outlined in the Operator’s Guide, timely routine required maintenance must be performed to maintain
warranty coverage. BRP may require proof of proper maintenance prior to authorizing warranty coverage.
6. WHAT TO DO TO OBTAIN WARRANTY COVERAGE
The registered owner must notify an authorized Dealer within two (2) days of the appearance of a defect.
Owner must bring Product, including any defective part therein, to Dealer promptly after the appearance
of the defect, and in any event, within the warranty period, and must provide Dealer with reasonable op-
portunity to repair the defect. The expenses of transporting Product to and from Dealer for warranty ser-
vice are to be borne by the owner.
If the Product has not previously been registered, the owner may also be required to present proof of pur-
chase to Dealer for warranty repairs. Owner is required to sign the repair/work order prior to the start of
the repair in order to validate the warranty repair.
All parts replaced under this warranty become the property of BRP.
7. WHAT BRP WILL DO
BRP’s obligations under this warranty are limited to, at its sole discretion, repairing or replacing parts of
Product found to be defective in material or workmanship, in the reasonable judgment of BRP. Such repair
or replacement of parts will be done without charge for parts and labor, at any authorized Dealer. BRP’s
responsibility is limited to making the required repairs or replacements of parts with new or BRP-certified
re-manufactured parts. No claim of breach of warranty shall be cause for cancellation or rescission of the
sale of Product to owner.
In the event that warranty service is required outside of the fifty United States or Canada, owner will bear
responsibility for any additional charges due to local practices and conditions, such as, but not limited to,
freight, insurance, taxes, license fees, import duties, and any and all other financial charges, including
those levied by governments, states, territories and their respective agencies.
BRP reserves the right to improve, modify or change Products from time to time without assuming any
obligation to modify Products previously manufactured.
53
Product Specification
CategoriesBRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual
Document TypeBoat Motor Manual. Marine Operator's Engine Guide.
Tags, , , , , ,
Model Year2008
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 66 pages
Document File TypePDF
Publisherevinrude.com
Wikipedia's PageEvinrude Outboard Motors
CopyrightAttribution Non-commercial
(1 votes, average: 3 out of 3)
Marine readers have rated 2008 Evinrude 75 90 hp E-TEC PL PX SL WEL WEX Outboard Boat Motor Owners Manual 3.0 out of 3.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

2008 Evinrude 75 90 hp E-TEC PL PX SL WEL WEX Outboard Boat Motor Owners Manual SKU UPC Model
dallas mckenzie on Aug 19, 2014. need help

i need some help me and this will be a great deal


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website