X OPERATION
IMPORTANT: In an emergency situation, the
engine will start and run without the clip con-
nected to the key switch. The operator
should always use the clip and lanyard
anytime the engine is running. Refer to
Emergency Stop/Key Switch on page 20.
WARNING
Avoid knocking or pulling the clip off
the stop switch during normal boating.
Avoid bumping the key if operating
without the clip on the switch. The
resulting unexpected loss of forward
motion can throw occupants forward,
causing injury.
Move the remote control handle to NEU-
TRAL.
WARNING
Keep the lanyard free from obstruc-
tions and entanglements.
If you are using a remote control that
does not have start-in-gear prevention,
the outboard can be started while it is
in gear. Protect against unexpected
boat movement by always starting your
outboard in NEUTRAL.
At each outing, test the system’s oper-
ation. With the engine running, remove
the clip from the switch by pulling the
lanyard. If the engine does not stop
running, see your Dealer.
ENGINE STARTING
DO NOT advance the throttle before start-up.
Refer to the Routine Inspection Checklist Advancing the throttle overrides the electron-
on page 34 for pre-launch checks before us- ic idle control system. After the engine starts,
ing your Evinrude E-TEC outboard.
the engine management module (EMM) au-
tomatically increases idle speed slightly. Idle
speed will decrease as the engine warms up.
The engine monitor gauge lights or display
will illuminate if the throttle is advanced.
You MUST supply water to the engine before
attempting to start it. Engine damage can oc-
cur quickly.
Be sure the water intake screens are below
the water surface.
Connect the clip to the emergency stop/key
switch. Snap the lanyard to a secure place on
the operator’s clothing or life vest — not
where it might tear away instead of activating
the stop switch.
Turn the key switch fully clockwise to the
START position. Crank the engine no longer
than 20 seconds.
IMPORTANT: The starter motor can be dam-
aged if operated continuously for more than
20
Upon start-up, release the key.
seconds.
1.
2.
3.
Clip
Emergency stop clip / key switch
Lanyard
21
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Document Type | Boat Motor Manual. Marine Operator's Engine Guide. |
| Tags | Evinrude 75 hp, Evinrude 90 hp, Evinrude PL, Evinrude PX, Evinrude SL, Evinrude WEL, Evinrude WEX |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Publisher | evinrude.com |
| Wikipedia's Page | Evinrude Outboard Motors |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Marine readers have rated 2008 Evinrude 75 90 hp E-TEC PL PX SL WEL WEX Outboard Boat Motor Owners Manual 3.0 out of 3.0 based on 1 product reviews. i need some help me and this will be a great deal