Chapter 6: Plumbing
Marine Head & Holding Tank
NOTICE
Check with local authorities about the legal use of marine head systems.
Electric Flush Head (If Equipped)
!
WARNING!
FLOODING and SWAMPING HAZARD!
•
Close the seawater intake seacock when leaving your boat unattended for any length of
time.
•
If the seacock is left open, a hose failure could flood the bilge, swamp the batteries and the
engines, and even sink your boat.
•
•
Read the marine head operation
and maintenance manual
before using the marine head
for the first time.
The electric flush marine head
uses seawater to flush waste
from the toilet into the holding
tank.
•
•
The seawater intake valve (sea-
cock) must be Open for the
head to work.
Check the content level of the
holding tank often by looking
at the side of tank.
•
•
Empty the holding tank at
every opportunity.
The holding tank is plumbed to
a fitting on the deck for dock-
side pump-out.
•
Keep the intake seacock Closed
while your boat is underway or
when the system will not be
used for long periods of time.
Winterizing the System
Read the marine head operation and maintenance manual for winterizing instructions.
59
| Categories | Maxum Manuals |
|---|---|
| Tags | Maxum 2900SE |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)