2008 Yamaha Outboard 9 15 9 9hp 15hp Boat Owners Manual

Maintenance
ECM01411
NOTICE
q
Do not place  the outboard motor on its
side   before   the   cooling   water
1
2
has
drained  from  it  completely,  otherwise
water may enter the cylinder through the
exhaust port and cause engine trouble.
Store the outboard motor in a dry,  well-
ventilated place, not in direct sunlight.
q
ZMU02051
EMU28304
1.
2.
Water surface
Lowest water level
Procedure
EMU28376
Flushing in a test tank
ECM00300
NOTICE
5.
Fill the tank with fresh water to above the
level of the anti-cavitation plate.NOTICE:
If the fresh water level is below the lev-
el of the anti-cavitation plate, or  if the
water  supply  is  insufficient,   engine
Do not run the engine without supplying it
with cooling water. Either the engine water
pump will  be damaged or the  engine will
be   damaged  from   overheating.  Before
starting the engine, be sure to supply wa-
ter to the cooling water passages.
seizure may occur.
[ECM00291]
6.
Cooling  system flushing  is  essential  to
prevent the cooling system from clogging
up with salt, sand, or dirt. In addition, fog-
ging of  the engine  is mandatory to  pre-
vent  excessive  engine damage  due  to
rust. Perform the flushing and fogging at
the   same  time.   WARNING!   Do  not
touch or remove electrical parts when
starting  or   during   operation.  Keep
hands,  hair,  and  clothes away  from
the flywheel  and other  rotating parts
while the engine is running.
Run the  engine at  a fast idle  for 1015
minutes in neutral position.
Just prior to turning off the engine, quickly
spray Yamaha Stor-Rite Engine Fogging
Oilalternately into each carburetor or the
fogging  hole   of  the  silencer  cover,   if
equipped. When  properly done,  the en-
gine will  smoke excessively  and almost
stall.
1.
Wash  the  outboard  motor  body  using
fresh water.NOTICE:  Do not spray wa-
ter into the air intake.
information, see page 43.
[ECM01840]
For further
2.
Fill the fuel  tank with fresh fuel  and add
one ounce of Yamaha Fuel  Conditioner
and Stabilizerto each gallon of fuel.
TIP:
The  use of  Yamaha  Fuel Conditioner  and
Stabilizer”  eliminates the  need  to drain  the
fuel system. Consult  your Yamaha dealer or
other qualified mechanic if the  fuel system is
to be drained instead.
[EWM00091]
7.
8.
3.
Remove the  engine top  cowling and si-
lencer cover.
4.
Install  the  outboard  motor  on  the  test
tank.
9.
Remove the outboard motor from the test
tank.
42
Product Specification
CategoriesYamaha Outboard Manuals
Document TypeBoat Motor Manual Free Download. Marine Operator's Boating Guide.
Tags,
Model Year2008
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 72 pages
LanguageEnglish
Product BrandYamaha Motor. Yamaha Motor Corporation, USA - Support Customer Relations for US: 1-800-962-7926
Yamaha Boats: 1-800-962-7926
Yamaha Outboard Customer Relations: 1-866-894-1626 , Yamaha Outboard
Document File TypePDF
Publisheryamaha-motor.com
Wikipedia's PageYamaha Motor Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website