2008 Yamaha Outboard 8 8hp Boat Owners Manual

Maintenance
9.
Remove  the  outboard  motor from  the
test tank.
10.
11.
Drain the  cooling water  completely out
of the motor. Clean the body thoroughly.
Install  the  silencer  cover/cap  and  top
cowling.
EMU28402
Lubrication
1.
Install  the spark  plug(s)  and torque  to
proper specification. For  information on
spark plug installation, see page 48.
EMU28460
2.
Change  the  gear  oil. For  instructions,    Checking painted surface of motor
see page 51. Inspect the oil for the pres-   Check the motor for scratches, nicks, or flak-
ence of water that indicates a leaky seal.   ing  paint.  Areas   with  damaged  paint  are
Seal replacement  should be performed     more  likely to  corrode. If  necessary,  clean
by an authorized Yamaha dealer prior to    and paint the areas. A touch-up paint is avail-
use.
able from your Yamaha dealer.
3.
Grease all grease fittings. For further de-
tails, see page 48.
EMU37081
Periodic maintenance
TIP:
EWM01981
WARNING
For  long-term  storage, fogging  the  engine
with   oil   is  recommended.   Contact   your
Yamaha dealer for information about fogging
These   procedures   require  mechanical
skills, tools,  and supplies.  If you  do not
have the proper  skills, tools, or supplies
to   perform  a   maintenance   procedure,
have a  Yamaha dealer or  other qualified
mechanic do the work.
oil and procedures for your engine.
EMU28423
Cleaning and anticorrosion
measures
1.
Wash down the exterior of the outboard     The  procedures  involve   disassembling
motor with fresh water  and dry off com-     the motor and exposing dangerous parts.
pletely. NOTICE:  Do  not spray  water    To reduce the risk of  injury from moving,
into the air intake.
[ECM01840]
hot, or electrical parts:
2.
3.
Spray the  outboard motor  exterior with       q  Turn off  the  engine  and  keep  engine
Yamaha Silicone Protectant.
shut-off cord  (lanyard)  with you  when
you perform maintenance unless other-
wise specified.
Wax  the  cowling  with  a  non-abrasive
wax such as Yamaha Silicone Wax.
EMU28451
q Allow  the  engine  to  cool before  han-
dling hot parts or fluids.
Cleaning the outboard motor
After use, wash the  exterior of the outboard
motor  with  fresh  water.  Flush  the  cooling
system with fresh water.
q
Always completely reassemble the mo-
tor before operation.
Maintenance,  replacement,  or  repair  of
the  emission  control  devices  and  sys-
43
Product Specification
CategoriesYamaha Outboard Manuals
Document TypeBoat Motor Manual Free Download. Marine Operator's Boating Guide.
Tags
Model Year2008
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 72 pages
LanguageEnglish
Product BrandYamaha Motor. Yamaha Motor Corporation, USA - Support Customer Relations for US: 1-800-962-7926
Yamaha Boats: 1-800-962-7926
Yamaha Outboard Customer Relations: 1-866-894-1626 , Yamaha Outboard
Document File TypePDF
Publisheryamaha-motor.com
Wikipedia's PageYamaha Motor Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website