Using Your E-TEC Outboard
Anti-Corrosion Anodes
WEEDY WATER
Your outboard is equipped with one or more Weeds block water intakes and may cause
anodes that protect it from galvanic corrosion. your outboard to overheat. Weeds on the pro-
Disintegration of the anode is normal and in- peller create vibration and reduce boat speed.
dicates it is working. Check each anode peri-
When operating in weedy water, run at slow
odically. Replace anodes smaller than 2/3
speeds and in REVERSE frequently to clear
their original size. See your Dealer for re-
weeds from the propeller and water intakes.
placements.
Check the water pump indicator often.
If REVERSE operation does not clear away
weeds, SHUT OFF the engine. Remove
weeds from propeller area and water intakes
before operating at higher speed.
HIGH ALTITUDE
Your outboard’s EMM will automatically com-
pensate for changes in altitude. However, if
you boat above 3000 ft. (900 m), you will ex-
perience a slight loss of power due to reduced
air density.
If your engine drops below the recommended
RPM operating range at full throttle, have your
Dealer select a lower pitch propeller.
Galvanic corrosion destroys underwater met-
al parts and can occur in fresh or salt water; If you return to sea level, have your Dealer in-
however, salt, brackish, and polluted waters stall the original propeller and verify correct
will accelerate corrosion.
RPM operating range.
Metal-based antifouling paint on the boat or
outboard and the use of improperly installed
shore power in the area of your moored boat
will also accelerate corrosion.
FREEZING WEATHER
IMPORTANT: When operating in conditions
IMPORTANT: NEVER paint the anode, its under 32°F (0°C), Evinrude/Johnson XD100
fasteners, or its mounting surface. Painting oil must be used.
will reduce its corrosion protection.
During operation in freezing weather, keep
the gearcase submerged at all times.
Upon removing your outboard from the water,
leave it in a vertical position until its cooling
system is drained. Store the outboard verti-
cally.
If the outboard’s gearcase is equipped with an
integral speedometer pickup, all water must
be cleared from the hose to prevent gearcase
damage. Refer to Storage on page 38.
WARNING
Water remaining in the gearcase, cool-
ing system or other components can
freeze, causing serious engine dam-
age.
32
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Document Type | Boat Motor Manual. Marine Operator's Engine Guide. |
| Tags | Evinrude 75 hp, Evinrude 90 hp, Evinrude PL, Evinrude PX, Evinrude SL, Evinrude WEL, Evinrude WEX |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Publisher | evinrude.com |
| Wikipedia's Page | Evinrude Outboard Motors |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Marine readers have rated 2008 Evinrude 75 90 hp E-TEC PL PX SL WEL WEX Outboard Boat Motor Owners Manual 3.0 out of 3.0 based on 1 product reviews. i need some help me and this will be a great deal