Using Your E-TEC Outboard
Alcohol Fuels
WARNING
Your outboard has been designed to operate
using the specified fuels; however, be aware
of the following:
Store fuel tanks in a well-ventilated
area, away from heat and open flame.
Prevent escape of liquid or vapors
which could accidentally ignite.
•
•
•
The boat’s fuel system may have different
requirements regarding the use of alcohol
fuels. Refer to the boat’s owner guide.
Alcohol attracts and holds moisture that can
cause corrosion of metallic parts in the fuel
system.
Close the filler cap vent screw, if
equipped.
Be sure the disconnected fuel hose
does not drip.
Alcohol blended fuel may cause engine per-
formance problems.
Using alcohol-extended fuels is acceptable
IMPORTANT: Fuel distribution hoses in the
boat must deliver fuel at the rate of flow need-
ed by the outboard. Minimum inside diameter
ONLY if the alcohol content does not exceed:
•
•
10% ethanol by volume; or
5% methanol with 5% cosolvents by volume. of fuel hoses must be 3/8 in. (9 mm).
Fuel systems with built-in tanks, particularly
those that include antisiphon valves and filter/
FUEL SYSTEM OPERATION
primer units, may have restrictions not allow-
ing the engine fuel pump to deliver sufficient
fuel under all conditions. This can result in a
If the fuel hose is disconnected for any rea- loss of performance. If a performance prob-
son, seal it to prevent spillage. Cap the fuel lem exists, see your Dealer.
fitting to prevent contamination.
Connecting the Fuel Hose
1)
2)
Connect the fuel hose to the 3/8 in. (9 mm)
FUEL ADDITIVES
The only fuel additives approved for use in
your Evinrude E-TEC outboard are:
fuel fitting. Fasten hose securely with
clamp (18.5 mm) from owner’s kit.
•
•
Evinrude/Johnson 2+4 Fuel Conditioner
Evinrude/Johnson Fuel System Cleaner
Use of other fuel additives can result in
poor performance or engine damage.
1
Evinrude/Johnson 2+4 Fuel Conditioner will
help prevent gum and varnish deposits from
forming in fuel system components and will
remove moisture from the fuel system. It can
be used continuously and should be used
during any period when the outboard is not
being operated on a regular basis. Its use will
reduce spark plug fouling, fuel system icing,
and fuel system component deterioration.
1.
Fuel hose and fitting – 3/8 in. (9 mm)
Evinrude/Johnson Fuel System Cleaner will
help keep fuel injectors in optimal operating
condition.
16
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Document Type | Boat Motor Manual. Marine Operator's Engine Guide. |
| Tags | Evinrude 40 hp, Evinrude 50 hp, Evinrude 60 hp, Evinrude PL |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Publisher | evinrude.com |
| Wikipedia's Page | Evinrude Outboard Motors |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4.5 out of 5)
Marine readers have rated 2008 Evinrude 40 50 60 hp E-TEC PL Outboard Boat Motor Owners Manual 4.5 out of 5.0 based on 4 product reviews. Perfect!!!!!!!!!!!!!!!!!!Top.........Thanks......
Thanks for having this manual available. Hope it works. Thanksks