2007 Yamaha Outboard F75 F90 Boat Owners Manual

Maintenance
Gear oil quantity:
the normal running position, use an  addi-
tional support device to secure it in the tilt
position.
670.0 cm
³ (22.65 US oz) (23.63 Imp.oz)
Tightening torque for engine:
Spark plug:
25.0 Nm (18.4 ft-lb) (2.55 kgf-m)
Propeller nut:
35.0 Nm (25.8 ft-lb) (3.57 kgf-m)
Engine oil drain bolt:
28.0 Nm (20.7 ft-lb) (2.86 kgf-m)
Engine oil filter:
18.0 Nm (13.3 ft-lb) (1.84 kgf-m)
The outboard  motor should be  trailered and
stored in the normal running position. If there
is insufficient road  clearance in this position,
then trailer the outboard motor in the tilt posi-
tion using a  motor support device such  as a
transom  saver  bar.  Consult   your  Yamaha
EMU28222
Transporting and storing out-
dealer for further details.
EMU30061
Storing outboard motor
board motor
EWM00690
WARNING
When storing  your Yamaha  outboard motor
for  prolonged periods  of time  (2  months or
longer),  several important  procedures  must
q
Leaking fuel is a fire hazard. When trans-
porting and storing the outboard motor,    be performed to prevent excessive damage. It
close the air vent screw and fuel cock to   is advisable to have your outboard motor ser-
prevent fuel from leaking.
USE CARE when transporting fuel tank,
whether in a boat or car.
viced by an authorized Yamaha dealer prior to
storage. However, you, the owner, with a min-
imum of tools, can perform the following pro-
q
q
DO NOT  fill fuel container to  maximum
capacity. Gasoline will expand consider-
ably as  it  warms up  and  can build  up
pressure in the fuel  container. This can
cause fuel  leakage and  a  potential fire
hazard.
cedures.
ECM01360
CAUTION:
q
To   prevent  problems   which   can  be
caused by oil entering the cylinder from
the sump,  keep  the outboard  motor in
the  attitude  shown  when  transporting
and storing it. Do not store or transport
the outboard motor  on its side (not up-
right).
EWM00700
WARNING
Never get under  the lower unit  while it is
tilted, even if a motor support bar is used.
Severe injury could occur  if the outboard
motor accidentally falls.
q
Do not place  the outboard motor on its
side   before   the
cooling   water   has
drained  from  it  completely,  otherwise
water may enter the cylinder through the
exhaust port and cause engine trouble.
ECM00660
CAUTION:
Do not  use the tilt  support lever or  knob   q Store the  outboard motor in a dry, well-
when trailering the boat. The outboard mo-
tor could shake loose from the tilt support
and fall. If the motor cannot be trailered in
ventilated place, not in direct sunlight.
49
Product Specification
CategoriesYamaha Outboard Manuals
Document TypeBoat Motor Manual Free Download. Marine Operator's Boating Guide.
Tags,
Model Year2007
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 90 pages
LanguageEnglish
Product BrandYamaha Motor. Yamaha Motor Corporation, USA - Support Customer Relations for US: 1-800-962-7926
Yamaha Boats: 1-800-962-7926
Yamaha Outboard Customer Relations: 1-866-894-1626 , Yamaha Outboard
Document File TypePDF
Publisheryamaha-motor.com
Wikipedia's PageYamaha Motor Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website