Maintenance
could cause leakage or damage.
ECM01240
CAUTION:
Change the engine oil after the first 10
hours of operation, and every 100 hours
or at 6-month intervals thereafter. Other-
wise the engine will wear quickly.
1
NOTE:
Change the engine oil when the oil is still
warm.
ZMU05561
1.
Drain screw
1.
Put the outboard motor in an upright po-
sition (not tilted).
3.
Put a new gasket on the oil drain screw.
Apply a light coat of oil to the gasket and
install the drain screw.
Drain screw tightening torque:
28.0
Nm (20.7 ft-lb) (2.86 kgf-m)
NOTE:
If a torque wrench is not available when you
are installing the drain screw, finger tighten
the screw just until the gasket comes into
contact with the surface of the drain hole.
ZMU05554
2.
Prepare a suitable container that holds a Then tighten 1/4 to 1/2 turn more. Tighten
larger amount than the engine oil capac- the drain screw to the correct torque with a
ity. Loosen and remove the drain screw torque wrench as soon as possible.
while holding the container under the
4.
Add the correct amount of oil through the
filler hole. Install the filler cap.
drain hole. Then remove the oil filler cap.
Let the oil drain completely. Wipe up any
spilled oil immediately.
Recommended engine oil:
4-stroke
outboard motor oil
Engine oil quantity (excluding oil filter):
L (1.69 US qt) (1.41 Imp.qt)
1.6
64
| Categories | Yamaha Outboard Manuals |
|---|---|
| Document Type | Boat Motor Manual Free Download. Marine Operator's Boating Guide. |
| Tags | Yamaha F15C, Yamaha F20 |
| Model Year | 2007 |
| Download File |
|
| Language | English |
| Product Brand | Yamaha Motor. Yamaha Motor Corporation, USA - Support Customer Relations for US: 1-800-962-7926
Yamaha Boats: 1-800-962-7926 Yamaha Outboard Customer Relations: 1-866-894-1626 , Yamaha Outboard |
| Document File Type | |
| Publisher | yamaha-motor.com |
| Wikipedia's Page | Yamaha Motor Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)