Using Your E-TEC Outboard
OIL REQUIREMENTS
FUEL REQUIREMENTS
WARNING
The following outboard oils are recommend-
ed for use in your Evinrude E-TEC outboard:
Gasoline is extremely flammable and
highly explosive under certain condi-
tions. Follow the instructions in this
section explicitly. Improper handling of
fuel could result in property damage,
serious injury or death.
•
•
•
Evinrude/Johnson XD100;
Evinrude/Johnson XD50™; or
Evinrude/Johnson XD30™.
Evinrude/Johnson brand oils are formulated
to give best engine performance while con-
trolling piston and combustion chamber de-
posits, providing superior lubrication, and
ensuring maximum spark plug life.
Evinrude/Johnson XD100 oil is preferred
for your Evinrude E-TEC outboard. It is for-
mulated with special additives for cleaner
burning and lower consumption. This syn-
thetic blend oil also provides superior lubrica-
tion and maintains top performance.
Leaking fuel is a fire and explosion haz-
ard. All parts in the fuel system should
be inspected frequently and replaced if
signs of deterioration or leakage are
found. Inspect the fuel system each
time you refuel, each time you remove
the engine cover and annually.
Follow these instructions to ensure
safety when handing fuel:
IMPORTANT: When operating in conditions
under 32°F (0°C), Evinrude/Johnson XD100
oil must be used.
•
•
Always turn off the engine before fuel-
ing.
Never permit anyone other than an
adult to refill the fuel tank.
For added protection and cost reduction, an
authorized dealer can program your Evinrude
E-TEC outboard EMM to cut normal oil con-
sumption in half using Evinrude/Johnson
XD100 as compared to using a conventional
oil. Only an authorized Evinrude dealer
can program your outboard for this bene-
fit.
• Do not fill the fuel tank all the way to
the top or fuel may overflow when it
expands due to heating by the sun.
•
Remove portable fuel tanks from the
boat before fueling.
Always wipe off any fuel spillage.
Do not smoke, or allow open flames,
or sparks or use electrical devices
such as cellular phones in the vicinity
of a fuel leak or while fueling.
•
•
If Evinrude/Johnson brand oils are not avail-
able, you must use an oil that meets NMMA
TC-W3RL certification standards.
•
Always work in a well ventilated area.
IMPORTANT: If your EMM has been pro-
grammed for Evinrude/Johnson XD100,
DO NOT use any other oil unless in an emer-
gency. If Evinrude/Johnson XD100 is tempo-
rarily unavailable, a one-time-only use of an
oil that meets NMMA TC-W3RL certification
standards is allowed. If you discontinue using
Evinrude/Johnson XD100, you MUST first re-
turn to your Dealer to have the EMM repro-
grammed back to the original factory setting.
IMPORTANT: Always use fresh gasoline.
Gasoline will oxidize; the result is loss of oc-
tane, volatile compounds, and the production
of gum and varnish deposits which can de-
grade the fuel system.
IMPORTANT: Failure to follow oil specifica-
tions could void the engine warranty if a lubri-
cation-related failure occurs.
18
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 75 hp, Evinrude 90 hp, Evinrude PL, Evinrude PX, Evinrude SL |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Marine readers have rated 2007 Evinrude 75 90 hp E-TEC PL PX SL Outboard Motor Owners Manual 5.0 out of 5.0 based on 1 product reviews. great. just need to know on how to Evinrudg E-Tec 75 hp 2007refill your Trim and tilt fluid