X OPERATION
1)
Release port and starboard side engine 4) Holding the flywheel guard out of the way,
cover latches downward. Pull up on the tilt
handle to release the engine cover seal
and remove the engine cover.
hook the knot of your emergency start cord
into the notch on the flywheel. Wind the
cord clockwise in the flywheel ridge, mak-
ing one and a half full windings with the
cord.
1
2
2
3
1.
2.
Engine cover latch
Tilt handle
1
1. NEUTRAL
2. Knot
3. Rope in flywheel ridge
2)
Remove fuse holder from flywheel cover.
5)
Turn key switch ON.
6)
From a secure position in the boat, pull
hard on emergency starting cord to start
engine.
CAUTION
1
Keep everyone clear of your immediate
area when pulling on emergency start-
ing cord, especially behind you.
Repeat procedure, if necessary, until engine
starts.
1.
Fuse
3)
Raise flywheel guard from the fittings by 7) Refasten flywheel guard in place by push-
pulling up on the front two fastening tabs.
ing the three fastening tabs back onto the
fittings.
1
1
1.
Fastening tabs
1.
Fastening tabs
29
| Categories | Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 75 hp, Evinrude 90 hp, Evinrude PL, Evinrude PX, Evinrude SL |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)