Maintenance
for prolonged periods of time (2 months or
longer), several important procedures must
be performed to prevent excessive damage.
cooling water inlet.
ECM00300
CAUTION:
This is especially important for your oil injec- Do not run the engine without supplying
tion equipped outboard motor due to the lean it with cooling water. Either the engine
oil ratios used at idle prior to shutting the en- water pump will be damaged or the en-
gine off for the season. It is advisable to have gine will be damaged from overheating.
your outboard motor serviced by an autho- Before starting the engine, be sure to
rized Yamaha dealer prior to storage. How- supply water to the cooling water passag-
ever, you, the owner, with a minimum of
es.
tools, can perform the following procedures.
ECM00310
ECM01070
CAUTION:
CAUTION:
Avoid running the outboard motor at high
speed while on the flushing attachment,
otherwise overheating could occur.
Do not use any chemical goods contain-
ing Silicon, Phosphorus, or Lead. Other-
wise the oxygen sensor for the Electronic
Fuel Injection system could be damaged.
Consult your Yamaha dealer for details
on the use of chemical goods for storage.
EMU28301
Procedure
EMU30001
Flushing with the flushing attachment
1.
Wash the outboard motor body using
fresh water. For further information, see
page 52.
2.
Fill the fuel tank with fresh fuel and add
one ounce of “Yamaha Fuel Conditioner
and Stabilizer” (Part No. LUB-FUELC-
1.
Flushing attachment
5.
Cooling system flushing is essential to
prevent the cooling system from clog-
ging up with salt, sand, or dirt. In addi-
tion, fogging/lubricating of the engine is
mandatory to prevent excessive engine
damage due to rust. Perform the flush-
ing and fogging at the same time.
12-00)
to each gallon of fuel.
NOTE:
The use of “Yamaha Fuel Conditioner and
Stabilizer” eliminates the need to drain the
fuel system. Consult your Yamaha dealer or
other qualified mechanic if the fuel system is
to be drained instead.
EWM00090
WARNING
3.
4.
Remove the top cowling and propeller.
Install the flushing attachment over the
q
q
Do not touch or remove electrical parts
when starting or during operation.
Keep hands, hair, and clothes away
from the flywheel and other rotating
49
| Categories | Yamaha Outboard Manuals |
|---|---|
| Document Type | Boat Motor Manual Free Download. Marine Operator's Boating Guide. |
| Tags | Yamaha LZ250D, Yamaha LZ300D, Yamaha Z250D, Yamaha Z300D |
| Model Year | 2005 |
| Download File |
|
| Language | English |
| Product Brand | Yamaha Motor. Yamaha Motor Corporation, USA - Support Customer Relations for US: 1-800-962-7926
Yamaha Boats: 1-800-962-7926 Yamaha Outboard Customer Relations: 1-866-894-1626 , Yamaha Outboard |
| Document File Type | |
| Publisher | yamaha-motor.com |
| Wikipedia's Page | Yamaha Motor Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)