2005 Yamaha Outboard Z150D 175D 200D LZ150D 200D Boat Motor Owners Manual

Maintenance
tion, fogging/lubricating of  the engine is
mandatory to prevent  excessive engine
damage due  to rust. Perform the  flush-
ing and fogging at the same time.
stall  the  spark  plug(s)   and  torque  to
proper specification. For  information on
spark plug installation, see page 56.
Fill the  oil tanks. This  prevents the  for-
mation of condensation. For models with
a remote oil tank, it may be necessary to
manually  override  the   control  unit  to
completely fill the engine oil tank.
Change  the  gear  oil. For  instructions,
see page 63. Inspect the oil for the pres-
ence  of water  which  indicates a  leaky
seal. Seal  replacement  should be  per-
formed by an authorized Yamaha dealer
prior to use.
2.
3.
EWM00090
WARNING
q
q
Do not touch or remove electrical parts
when starting or during operation.
Keep  hands,  hair,   and  clothes  away
from  the  flywheel  and  other  rotating
parts while the engine is running.
NOTE:
When   using   the   flushing    attachment,
maintain adequate  water pressure  and a
steady water flow.
If the overheat warning device is activated,
turn  the   engine   off,  and   consult  your
Yamaha dealer.
q
4.
Grease all grease fittings. For further de-
tails, see page 56.
q
EMU30261
Cleaning and anticorrosion
measures
1.
Wash down the exterior of the outboard
motor with fresh water  and dry off com-
pletely.
6.
7.
Run the  engine at  a fast idle  for a  few
minutes in neutral position while supply-
ing fresh water.
Just prior to turning off the engine, quick-
ly   spray   Yamaha   Stor-Rite   Engine
Fogging Oil(Part  No. LUB-STRRT-12-
2.
Spray the  outboard motor  exterior with
Yamaha Silicone  Protectant(Part No.
LUB-SILCNE-13-00).
00)
alternately into the intake silencer or
ECM01401
CAUTION:
the fogging hole of the  silencer cover, if
equipped. When properly  done, the en-
gine will smoke  excessively and almost
stall.
Remove  the  flushing   attachment  and
wipe off any excess water.
Install the top cowling and propeller.
Drain the  cooling water  completely out
of the motor. Clean the body thoroughly.
Do not spray when the engine is running.
Also,  do not  spray  near the  silencer  or
into  the  engine.   Otherwise  the  engine
could be damaged.
8.
3.
Wax  the  cowling  with  a  non-abrasive
wax  such  as  Yamaha  Silicone  Wax
(Part No. ACC-11000-15-02).
9.
10.
EMU28430
Battery care
NOTE:
A flushing attachment is available from  your
Yamaha dealer.
EWM00330
WARNING
Battery electrolytic  fluid is dangerous; it
contains  sulfuric  acid  and  therefore  is
EMU28410
Lubrication (oil injection models)
1.
Grease the  spark plug  threads and  in-
50
Product Specification
CategoriesYamaha Outboard Manuals
Document TypeBoat Motor Manual Free Download. Marine Operator's Boating Guide.
Tags, , ,
Model Year2005
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 90 pages
LanguageEnglish
Product BrandYamaha Motor. Yamaha Motor Corporation, USA - Support Customer Relations for US: 1-800-962-7926
Yamaha Boats: 1-800-962-7926
Yamaha Outboard Customer Relations: 1-866-894-1626 , Yamaha Outboard
Document File TypePDF
Publisheryamaha-motor.com
Wikipedia's PageYamaha Motor Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website