2005 Yamaha Outboard VZ200D 225D 250D 300D Boat Owners Manual

Maintenance
other qualified mechanic if the fuel system is
to be drained instead.
prevent  the cooling  system  from  clog-
ging up  with salt, sand,  or dirt. In  addi-
tion, fogging/lubricating of  the engine is
mandatory to prevent  excessive engine
damage due  to rust. Perform the  flush-
ing and fogging at the same time.
3.
4.
Remove the top cowling and propeller.
Unscrew  the   garden  hose   connector
from the fitting on the bottom cowling.
EWM00090
WARNING
q
q
Do not touch or remove electrical parts
when starting or during operation.
Keep  hands,  hair,   and  clothes  away
from  the  flywheel  and  other  rotating
parts while the engine is running.
8.
9.
Run  the  engine  at  idle  in  neutral  for
about 1015 minutes.
Just prior to turning off the engine, quick-
ly   spray   Yamaha   Stor-Rite   Engine
Fogging Oil(Part  No. LUB-STRRT-12-
00)
alternately  into  each  carburetor  /
ZMU02361
each  intake  manifold.   When  properly
done, the engine will smoke excessively
and almost stall.
10.  After stopping  the  engine,  turn off  the
water and  disconnect the  garden hose
connector.
5.
6.
Screw the garden hose connector onto a
garden  hose  which is  connected  to  a
fresh water supply.
Turn on the  water tap and let the  water
flush through the cooling passages.
11.
Reinstall the garden hose  connector on
the fitting on the bottom cowling.
ECM00300
CAUTION:
Do not run  the engine without supplying     12.  Install the top cowling.
it  with cooling  water.  Either  the engine
water pump  will  be damaged  or the  en-
gine will  be  damaged from  overheating.
Before  starting  the  engine,  be  sure  to
supply water to the cooling water passag-
es.
EMU28410
Lubrication (oil injection models)
1.
Grease the  spark plug  threads and  in-
stall  the  spark  plug(s)   and  torque  to
proper specification. For  information on
spark plug installation, see page 48.
Fill the  oil tanks. This  prevents the  for-
mation of condensation. For models with
a remote oil tank, it may be necessary to
manually  override  the   control  unit  to
completely fill the engine oil tank.
2.
ECM00310
CAUTION:
Avoid running the outboard motor at high
speed while  on the flushing  attachment,
otherwise overheating could occur.
3.
Change  the  gear  oil. For  instructions,
see page 55. Inspect the oil for the pres-
7.
Cooling system  flushing  is essential  to
42
Product Specification
CategoriesYamaha Outboard Manuals
Document TypeBoat Motor Manual Free Download. Marine Operator's Boating Guide.
Tags, , ,
Model Year2005
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 80 pages
LanguageEnglish
Product BrandYamaha Motor. Yamaha Motor Corporation, USA - Support Customer Relations for US: 1-800-962-7926
Yamaha Boats: 1-800-962-7926
Yamaha Outboard Customer Relations: 1-866-894-1626 , Yamaha Outboard
Document File TypePDF
Publisheryamaha-motor.com
Wikipedia's PageYamaha Motor Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website