Maintenance
the fogging hole of the silencer cover, if
equipped. When properly done, the en-
gine will smoke excessively and almost
stall.
8.
Remove the flushing attachment and
wipe off any excess water.
9.
10.
Install the top cowling and propeller.
Drain the cooling water completely out
of the motor. Clean the body thoroughly.
NOTE:
A flushing attachment is available from your
Yamaha dealer.
1.
Flushing attachment
5.
Cooling system flushing is essential to
prevent the cooling system from clog-
ging up with salt, sand, or dirt. In addi-
tion, fogging/lubricating of the engine is
mandatory to prevent excessive engine
damage due to rust. Perform the flush-
ing and fogging at the same time.
EMU28400
Lubrication (except oil injection
models)
1.
Grease the spark plug threads and in-
stall the spark plug(s) and torque to
proper specification. For information on
spark plug installation, see page 47.
Change the gear oil. For instructions,
see page 55. Inspect the oil for the pres-
ence of water that indicates a leaky seal.
Seal replacement should be performed
by an authorized Yamaha dealer prior to
use.
EWM00090
2.
WARNING
q
q
Do not touch or remove electrical parts
when starting or during operation.
Keep hands, hair, and clothes away
from the flywheel and other rotating
parts while the engine is running.
3.
Grease all grease fittings. For further de-
tails, see page 47.
NOTE:
q
When
maintain adequate water pressure and a
steady water flow.
using
the
flushing
attachment,
EMU28421
Cleaning and anticorrosion
measures
1.
2.
3.
Wash down the exterior of the outboard
motor with fresh water and dry off com-
pletely.
q
If the overheat warning device is activated,
turn the engine off, and consult your
Yamaha dealer.
Spray the outboard motor exterior with
6.
7.
Run the engine at a fast idle for a few
minutes in neutral position while supply-
ing fresh water.
Just prior to turning off the engine, quick-
ly spray “Yamaha Stor-Rite Engine
Fogging Oil” (Part No. LUB-STRRT-12-
“
Yamaha Silicone Protectant” (Part No.
LUB-SILCNE-13-00).
Wax the cowling with a non-abrasive
wax such as “Yamaha Silicone Wax”
(Part No. ACC-11000-15-02).
00)
alternately into the intake silencer or
41
| Categories | Yamaha Outboard Manuals |
|---|---|
| Document Type | Boat Motor Manual Free Download. Marine Operator's Boating Guide. |
| Tags | Yamaha F50D, Yamaha F60D, Yamaha T50D, Yamaha T60D |
| Model Year | 2005 |
| Download File |
|
| Language | English |
| Product Brand | Yamaha Motor. Yamaha Motor Corporation, USA - Support Customer Relations for US: 1-800-962-7926
Yamaha Boats: 1-800-962-7926 Yamaha Outboard Customer Relations: 1-866-894-1626 , Yamaha Outboard |
| Document File Type | |
| Publisher | yamaha-motor.com |
| Wikipedia's Page | Yamaha Motor Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)