2005 Yamaha Outboard 9.9D 15D Boat Motor Owners Manual

Maintenance
start position during warm-up. The boat
could unexpectedly start to move, which
could result in an accident.
ECM00490
CAUTION:
This procedure  must be performed  while
the outboard motor is in the water. A flush-
ing attachment or test tank can be used.
ZMU02087
A diagnostic  tachometer should be  used for
this procedure. Results  may vary depending
on  whether  testing   is  conducted  with  the
flushing attachment, in a test tank, or with the
outboard motor in the water.
EMU29120
Exhaust leakage
Start the  engine and  check that no  exhaust
leaks  from  the  joints between  the  exhaust
cover, cylinder head, and body cylinder.
1.
Start the engine and  allow it to warm up
fully in neutral until it is running smoothly.
EMU29130
Water leakage
2-hp
model: Warm  the  engine with  the    Start  the  engine  and  check  that  no  water
throttle in the start position or  less. If the    leaks  from  the  joints  between  the exhaust
outboard is mounted  on a boat, be  sure    cover, cylinder head, and body cylinder.
the boat is tightly moored.
EMU29171
Checking propeller
NOTE:
EWM00321
WARNING
Correct idling speed inspection is only possi-
ble  if the  engine  is fully  warmed  up. If  not    You  could be  seriously injured  if the en-
warmed up fully, the idle speed  will measure    gine accidentally starts when you are near
higher than normal. If you have difficulty veri-    the propeller.
fying the idle speed, or the idle speed requires  q Before inspecting,  removing, or install-
adjustment, consult a Yamaha dealer or other
qualified mechanic.
ing the propeller, remove the spark plug
caps from  the spark plugs.  Also, place
the shift control in neutral, turn the main
2.
Verify  whether the  idle  speed is  set  to
specification.  For  idle  speed  specifica-
tions, see page 32.
switch to
(off) and remove the key,
and remove the lanyard from the engine
stop switch. Turn off  the battery cut-off
switch if your boat has one.
EMU29111
Checking wiring and connectors
q
q
Check that each grounding wire is properly
secured.
Check that each connector is engaged se-
curely.
q
Do not use your hand to hold the propel-
ler  when  loosening  or   tightening  the
propeller nut. Put a wood block between
the anti-cavitation plate and  the propel-
ler to prevent the propeller from turning.
40
Product Specification
CategoriesYamaha Outboard Manuals
Document TypeBoat Motor Manual Free Download. Marine Operator's Boating Guide.
Tags,
Model Year2005
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 64 pages
LanguageEnglish
Product BrandYamaha Motor. Yamaha Motor Corporation, USA - Support Customer Relations for US: 1-800-962-7926
Yamaha Boats: 1-800-962-7926
Yamaha Outboard Customer Relations: 1-866-894-1626 , Yamaha Outboard
Document File TypePDF
Publisheryamaha-motor.com
Wikipedia's PageYamaha Motor Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website