2005 Yamaha Outboard 115D Boat Motor Owners Manual

Maintenance
Tightening torque for engine:
Spark plug:
then trailer the outboard  motor in the tilt po-
sition using a motor  support device such as
a transom saver  bar. Consult your  Yamaha
25.0
Nm (18.4 ft-lb) (2.55 kgf-m)
Propeller nut:
dealer for further details.
55.0
Nm (40.6 ft-lb) (5.61 kgf-m)
EMU30272
Storing outboard motor
EMU28222
Transporting and storing
outboard motor
When storing your  Yamaha outboard motor
for prolonged  periods of  time (2  months or
longer), several  important procedures  must
be performed to prevent excessive damage.
It is  advisable to have  your outboard motor
serviced  by an  authorized  Yamaha  dealer
prior to  storage.  However, you,  the owner,
with a minimum of tools, can perform the fol-
EWM00690
WARNING
q
Leaking  fuel   is  a  fire  hazard.   When
transporting and  storing the  outboard
motor, close the air vent screw and fuel
cock to prevent fuel from leaking.
USE CARE when transporting fuel tank,
whether in a boat or car.
DO NOT fill fuel  container to maximum
capacity. Gasoline will  expand consid-
erably as it warms up and can  build up
pressure in the fuel container. This can
cause fuel  leakage and a  potential fire
hazard.
lowing procedures.
q
q
ECM01411
CAUTION:
q Do not  place the outboard motor on its
side   before   the   cooling   water   has
drained  from it  completely,  otherwise
water  may enter  the  cylinder  through
the exhaust port and cause engine trou-
ble.
EWM00700
WARNING
q Store the outboard motor in a dry, well-
ventilated place, not in direct sunlight.
Never get under the  lower unit while it is
tilted, even if a motor support bar is used.
Severe injury could occur if the outboard
motor accidentally falls.
ECM00660
CAUTION:
Do not use  the tilt support lever  or knob
when  trailering  the  boat.  The  outboard
motor could shake loose from the tilt sup-
port and fall. If the  motor cannot be trail-
ered in the  normal running position, use
an additional support  device to secure it
in the tilt position.
ZMU04154
EMU28301
Procedure
EMU28380
Flushing with the flushing attachment
Wash  the  outboard  motor body  using
fresh water. For further information, see
The outboard motor should  be trailered and
stored in the normal running position. If there
is insufficient road clearance in this position,
1.
41
Product Specification
CategoriesYamaha Outboard Manuals
Document TypeBoat Motor Manual Free Download. Marine Operator's Boating Guide.
Tags
Model Year2005
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 81 pages
LanguageEnglish
Product BrandYamaha Motor. Yamaha Motor Corporation, USA - Support Customer Relations for US: 1-800-962-7926
Yamaha Boats: 1-800-962-7926
Yamaha Outboard Customer Relations: 1-866-894-1626 , Yamaha Outboard
Document File TypePDF
Publisheryamaha-motor.com
Wikipedia's PageYamaha Motor Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website