OIL
MIXING FUEL AND OIL
Evinrude/Johnson XD25™ Formula outboard
oil is recommended for your outboard. It con-
tains a richer additive package than other TC-W3
oils, minimizing carbon build-up and deposits on
pistons and bearing surfaces. It provides 25%
greater detergency than minimum TC-W3 require-
ments.
Evinrude/Johnson brand oils are formulated to give
best engine performance while controlling piston
and combustion chamber deposits, providing supe-
rior lubrication and ensuring maximum spark plug
life.
Use the following chart and these guidelines to mix
oil with the engine’s fuel.
Fuel
Ratio
50:1
25:1
6 U.S. Gallons
16 fl. oz. oil
3 U.S. Gallons
8 fl. oz. oil
1 Liter
20 ml oil
40 ml oil
32 fl. oz. oil
16 fl. oz. oil
Portable Tank
Above and below 32° F (0°C), add one gallon of fu-
el. Pour in required amount of oil. Add remaining fu-
el. Install filler cap and tip tank gently to distribute
oil.
If Evinrude/Johnson XD25 Formula outboard oil is
not available, you must use an NMMA-certified TC-
W3 oil such as Evinrude/Johnson direct injection oil
or Evinrude biodegradable outboard oil.
IMPORTANT: Failure to follow this recommenda-
tion could void the engine warranty if a lubrication-
related failure occurs.
ADDITIVES
IMPORTANT: Only use fuel additives approved by
BMCA for your outboard. Use of other fuel additives
can result in poor performance or engine damage.
Evinrude/Johnson 2+4 fuel conditioner will help
prevent gum and varnish deposits from forming in
fuel system components and will remove moisture
from the fuel system. It can be used continuously
and should be used during any period when your
engine is not being operated on a regular basis. Its
use will reduce spark plug fouling, fuel system icing,
and fuel system component deterioration.
Permanently Installed Tank
Above 32° F (0° C), pour oil slowly with the fuel as
tank is filled. Below 32° F (0° C), add one gallon of
fuel to a separate container. Pour in required
amount of oil. Install filler cap and tip container gen-
tly to distribute oil. Slowly pour oil/fuel mixture into
tank with fuel as tank is filled.
FUEL/OIL RATIO
New Engine
During break-in, you must use a 25:1 (4% oil) fuel/
oil ratio in your fuel tank. Refer to Break-In (10
Hours).
Normal Operation
After break-in, the engine must be operated at a
50:1 (2% oil) fuel/oil ratio.
High Performance
During high performance operation you must use a
25:1 (4% oil)
fuel/oil ratio in your fuel tank.
Fuel and Oil - 15
| Categories | BRP Brand Manuals, Johnson 2-Stroke Manuals, Johnson Brand Manuals, Johnson Outboard Manuals |
|---|---|
| Tags | Johnson 10 hp, Johnson 15 hp, Johnson 9.9 hp, Johnson R, Johnson RHL, Johnson RL, Johnson TE, Johnson TEL |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 4)
Marine readers have rated 2005 Johnson 9.9 10 15 hp R RL RHL TE TEL 2-Stroke Outboard Owners Manual 4.0 out of 4.0 based on 2 product reviews. Good website