Power Trim and Tilt Fluid Reservoir
Tilt the motor up and engage the tilt support. De-
pending on your model, refer to Power Trim and
Tilt. Remove filler cap and check fluid level. If nec-
essary, add enough Evinrude/Johnson Power Trim/
Tilt and Power Steering Fluid to bring the fluid level
even with the bottom of the fill cap hole when the
unit is at full tilt.
1
Throttle and shift linkage
BREATHER AND FUEL LINE
2
Inspect the breather and fuel line for leaks, cracks,
swelling, or other damage. If the breather or fuel
line are damaged in any way, the component must
be replaced.
An authorized Evinrude/Johnson Dealer should
service the breather and fuel line.
1.
2.
Tilt support
Filler cap
IMPORTANT: Correct fluid level must be main-
tained to ensure operation of the impact protection
built into this unit.
Lubrication Points
1
Refer to Engine Maintenance and Inspection
Schedule for lubrication frequency and recom-
mended lubricant.
1.
Breather
1
1.
Swivel bracket, tilt support
Fuel line
Maintenance - 43
| Categories | BRP Brand Manuals, Johnson 4-Stroke Manuals, Johnson Brand Manuals, Johnson Outboard Manuals |
|---|---|
| Tags | Johnson 200 hp, Johnson 225 hp, Johnson CX4, Johnson CZ4, Johnson PX4, Johnson PZ4 |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)