2004 Yamaha Outboard Z300C LZ300C Boat Owners Manual

Maintenance
Stabilizereliminates  the need  to drain  the
fuel system. Consult your Yamaha dealer or
other qualified mechanic if the fuel system is
to be drained instead.
ing and fogging at the same time.
EWM00090
WARNING
q Do not touch or remove electrical parts
when starting or during operation.
Keep  hands,  hair,   and  clothes  away
from  the  flywheel  and  other  rotating
parts while the engine is running.
3.
4.
Remove the top cowling and propeller.
Install the  flushing attachment over  the
cooling water inlet.
q
ECM00300
CAUTION:
NOTE:
Do not run  the engine without supplying
it  with cooling  water.  Either  the engine
water pump  will  be damaged  or the  en-
gine will  be  damaged from  overheating.
Before  starting  the  engine,  be  sure  to
supply water to the cooling water passag-
es.
q
When   using   the   flushing    attachment,
maintain adequate  water pressure  and a
steady water flow.
If the overheat warning device is activated,
turn  the   engine   off,  and   consult  your
Yamaha dealer.
q
6.
7.
Run the  engine at a fast  idle for 1015
minutes in neutral position while supply-
ing fresh water.
ECM00310
CAUTION:
Avoid running the outboard motor at high
speed while  on the flushing  attachment,
otherwise overheating could occur.
Just prior to turning off the engine, quick-
ly spray Yamaha Stor-Rite Engine Fog-
ging Oil”  (Part No.  LUB-STRRT-12-00)
alternately into the intake silencer or the
fogging  hole  of  the  silencer   cover,  if
equipped. When properly  done, the en-
gine will smoke  excessively and almost
stall.
8.
9.
Remove  the  flushing   attachment  and
wipe off any excess water.
Install the top cowling and propeller.
NOTE:
A flushing attachment is available from  your
Yamaha dealer.
1.
Flushing attachment
EMU28410
5.
Cooling system  flushing  is essential  to    Lubrication (oil injection models)
prevent  the cooling  system  from  clog-
ging up  with salt, sand,  or dirt. In  addi-
tion, fogging/lubricating of  the engine is
mandatory to prevent  excessive engine
damage due  to rust. Perform the  flush-
1.
Grease the  spark plug  threads and  in-
stall  the  spark  plug(s)   and  torque  to
proper specification. For  information on
spark plug installation, see page 53.
Fill the  oil tanks. This  prevents the  for-
mation of condensation. For models with
2.
47
Product Specification
CategoriesYamaha Outboard Manuals
Document TypeBoat Motor Manual Free Download. Marine Operator's Boating Guide.
Tags,
Model Year2004
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 84 pages
LanguageEnglish
Product BrandYamaha Motor. Yamaha Motor Corporation, USA - Support Customer Relations for US: 1-800-962-7926
Yamaha Boats: 1-800-962-7926
Yamaha Outboard Customer Relations: 1-866-894-1626 , Yamaha Outboard
Document File TypePDF
Publisheryamaha-motor.com
Wikipedia's PageYamaha Motor Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website