2004 Johnson 90 115 140 hp PL4 PX4 X4 CX4 4-Stroke Outboard Owners Manual

SPARK PLUGS
PROPELLER
WARNING
WARNING
The   ignition  system   presents   a   serious
shock hazard. The primary circuit operates
in excess of 250 volts; the secondary circuit
operates in excess of 25,000 volts. Use cau-
tion  to  avoid  injury  from  shock  or  injury
resulting  from  your  reaction  to  shock.  Do
not  handle  primary  or  secondary  ignition
components while the engine is cranking or
running.
When  servicing  the  propeller,  always  shift
the outboard to NEUTRAL position, turn the
key switch OFF and disconnect battery pos-
itive  (+)   cable  so   the  engine   cannot  be
started accidentally.
IMPORTANT: Apply Triple-Guard grease to the en-
tire propeller shaft before installing the propeller. At
least annually, remove the propeller and check for
debris. Clean the shaft and regrease it before rein-
stalling a propeller.
Inspect  spark  plugs  periodically.  Replace  if  elec-
trodes are badly worn, insulators are cracked, or if
they are badly fouled.
To remove spark plugs, twist and remove all spark
plug leads. Unscrew spark plug from cylinder head.
To install spark plugs, wipe spark plug seats clean
with a clean rag. Install spark plugs finger tight, then
tighten to specified torque. Refer to Engine Speci-
fications.
Installation
Slide thrust washer onto shaft with shoulder facing
aft.
Slide propeller onto shaft, engaging the splines and
seating it on the thrust washer.
Slide spacer onto the shaft and engage the propel-
ler shaft splines.
Slide washer onto propeller shaft.
IMPORTANT: Avoid engine damage by installing
spark plugs into COOL cylinder head and not over-
tightening.
Before installing the spark plug lead, apply a light
coat of Triple-Guard grease to the ribbed portion of
the spark plug. This will help prevent corrosion be-
tween the spring terminal and the spark plug.
Wedge  a  block  of  wood   between  the  propeller
blade and the anti-ventilation plate.
1
Install propeller nut and tighten to a torque of 36 to
43 ft. lbs. (50 to 60
N·m).
1.
Ribbed portion of the spark plug
Maintenance - 45
Product Specification
CategoriesBRP Brand Manuals, Johnson 4-Stroke Manuals, Johnson Brand Manuals, Johnson Outboard Manuals
Tags, , , , , ,
Model Year2004
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 60 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(2 votes, average: 4.5 out of 5)
Marine readers have rated 2004 Johnson 90 115 140 hp PL4 PX4 X4 CX4 4-Stroke Outboard Owners Manual 4.5 out of 5.0 based on 2 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

2004 Johnson 90 115 140 hp PL4 PX4 X4 CX4 4-Stroke Outboard Owners Manual SKU UPC Model
Peter Felzmann on Apr 13, 2018.

Thanks for the fast processing


frank on Apr 21, 2014.

good to know


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website