X OPERATION
Press the STOP button until the outboard knotting or looping it. DO NOT cut and retie
stops running. If equipped, close the vent the lanyard.
screw on the fuel tank’s filler cap.
1
2
3
1
1.
Clip
1.
STOP button
2. Emergency stop clip / key switch
3.
Lanyard
Emergency Stop Switch
An extra clip is provided on the tiller handle. If
The emergency stop switch is on the steering the operator is thrown from the boat, another
handle. Use of the emergency stop feature is person can insert the extra clip in the stop
highly recommended on all boats.
switch and start the outboard.
DANGER
Always use the safety lanyard when
operating your boat to help prevent a
runaway boat and reduce the risk of
personal injury or death.
1
Connect the clip to the emergency stop
switch. Snap the lanyard to a secure place on
the operator’s clothing or life vest — not
where it might tear away instead of activating
the stop switch. Disconnecting the clip and
lanyard will stop the engine and prevent the
boat from becoming a runaway if the driver
moves beyond the range of the lanyard. If the
lanyard is too long, it can be shortened by
1.
Extra clip
WARNING
Avoid knocking or pulling the clip off
the stop switch during normal boating.
The resulting unexpected loss of for-
ward motion can throw occupants for-
ward, causing injury.
Keep the lanyard free from obstruc-
tions and entanglements.
At each outing, test the system’s oper-
ation. With the engine running, remove
the clip from the switch by pulling the
lanyard. If the engine does not stop
running, see your Dealer.
23
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 40 hp, Evinrude 50 hp, Evinrude 60 hp, Evinrude RT, Evinrude SL, Evinrude TL |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)