Repair instructions
1
2
884259
1
SP & DP
1
290A
884938
11b.
Drives without intgrated bearings:
Press out the bearings from the bearing sleeves. Use
special tools 884938 and 884265.
10.
Remove the needle bearings (1) from the upper
and lower gear cup assemblies.
Model 290A only: Also remove the spacerring (2).
NOTE! Do not mix upper and lower needle bearings.
Input gear (Double bearing box)
884259
885043
884938
12.
Brace the universal joint in a vice. Use soft jaws
11a.
Drives with intgrated bearings (SP-A1, DP-A1,
to protect the universal joint. Use special tool 885043
to remove the TX50 torx head screw and the tapered
washer; discard the screw.
DP-B1):
Press out the upper and lower gear wheels from the
bearings. Mount the bearing and gear assembly in
holding fixture 884938, use special tools 884259 with
handle 9991801.
NOTE! Sterndrives model 290A have an Allen head
screw instead of a TX50 torx head screw.
Remove the double bearing box from the universal
joint.
48
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 280, Volvo Penta 280-DP, Volvo Penta 285, Volvo Penta 290, Volvo Penta 290-DP, Volvo Penta DP-A, Volvo Penta DP-B, Volvo Penta DP-C, Volvo Penta SP-A, Volvo Penta SP-C |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(9 votes, average: 4.22 out of 5)
Marine readers have rated Volvo Penta 280 285 290 DP SP A B C Workshop Manual 4.2 out of 5.0 based on 9 product reviews. Problem Winther noise when turne
not pulling water so hope I find the info
Kinda a premature review, at this point I am asked to review the manual before ever seeing it?
Great step by step information.
thank you
needed it bad
ok