Repair instructions
27.
Now add the front and rear gear shims.
Add:
Forward gear shims
0.60 mm
884797
Aft gear shims
+ 0.31 mm
0.91
mm
Add nominal value
+ 120.00 mm
120.91
mm
The shim thickness is obtained by subtracting:
Subtract:
121.51
mm
25.
884797
Make sure the bearing marking is facing the tool.
Turn the bearing box over. Use special tool
, install the needle bearing in the bearing box.
-
120.91 mm
0.60 mm
Intermediate bearing shim
Shimming the intermediate bearing
26.
Start by adding the “F”-measurement and
“G”-measurement.
Add:
“
“
G”-measurement
F”-measurement
60.85 mm
884797
+ 79.91 mm
140.76
mm
Now subtract the “C”-measurement of the propeller
bearing box.
28.
Press the bearing race into the aft gear. Use spe-
cial tool 884797.
Subtract:
“
F” and ”G” combined
C”-measurement
140.76 mm
- 19.25 mm
“
121.51
mm
112
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 280, Volvo Penta 280-DP, Volvo Penta 285, Volvo Penta 290, Volvo Penta 290-DP, Volvo Penta DP-A, Volvo Penta DP-B, Volvo Penta DP-C, Volvo Penta SP-A, Volvo Penta SP-C |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(9 votes, average: 4.22 out of 5)
Marine readers have rated Volvo Penta 280 285 290 DP SP A B C Workshop Manual 4.2 out of 5.0 based on 9 product reviews. Problem Winther noise when turne
not pulling water so hope I find the info
Kinda a premature review, at this point I am asked to review the manual before ever seeing it?
Great step by step information.
thank you
needed it bad
ok