Repair instructions
18.
Hold the pinion nut with a 23 mm socket. Use spe-
cial tool 884830, or 3850598 as an alternative, and a
torque wrench. Torque the vertical shaft to 110 Nm
(81.5
lb.ft.).
20.
Find the stamping “C” on the bearing box. In this
WARNING! Be careful not to allow the
counter-hold wrench to damage the lower gear
housing. Use a piece of soft wood to brace the
wrench and protect the housing while applying
torque to the pinion nut.
case, “C”=25. Again, the stamping is in decimal mil-
limeters. The nominal dimension for the bearing box
is 19.00 mm. Add the “C”-stamping to the nominal di-
mension to get the “C”-measurement.
Add:
“
“
C”-nominal
19.00 mm
+ 0.25 mm
19.25 mm
C”-stamping
Shimming the bearing box
“C”-measurement
Now subtract the “C”-measurement from the
“F”-measurement.
Subtract:
“
“
F”-measurement
C”-measurement
79.91 mm
- 19.25 mm
60.66 mm
Aft gear bearing location
19.
80.00mm
The nominal dimension of the “F”-measurement is
±0.10 mm. Figures between 90 and 99 are
stamped into the lower gear housing indicating the
amount of variation from nominal that the housing is
machined. When the “F”-stamping is between 90 and
99,
add 79.00 mm to the figure. If the “F”-stamping is
between 00 and 10, add 80.00 mm to the figure. In
this case, the “F”-stamping is 91. Add 0.91 to the
nominal figure of 79.00. The sum for the
“
F”-measurement is 79.91.
110
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 280, Volvo Penta 280-DP, Volvo Penta 285, Volvo Penta 290, Volvo Penta 290-DP, Volvo Penta DP-A, Volvo Penta DP-B, Volvo Penta DP-C, Volvo Penta SP-A, Volvo Penta SP-C |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(9 votes, average: 4.22 out of 5)
Marine readers have rated Volvo Penta 280 285 290 DP SP A B C Workshop Manual 4.2 out of 5.0 based on 9 product reviews. Problem Winther noise when turne
not pulling water so hope I find the info
Kinda a premature review, at this point I am asked to review the manual before ever seeing it?
Great step by step information.
thank you
needed it bad
ok