Set/Reset Switch
This switch is used to set and reset certain functions with the Computron ATD
system. This switch corresponds with the (SR) button located on the steering
wheel.
Start/Stop Switch
This switch is used to start and stop certain functions of the Computron
system. This switch corresponds with the (SS) button located on the steering
wheel.
Graph Brightness Knob
This knob allows the driver to change the brightness of the digital speed
analyzer graph display.
Display Brightness Knob This knob allows the driver to change the brightness of the digital function
display located below the graphic speed analyzer graph. In the Computron
ATD's "Demo" mode, this knob is used to vary the readings for the digital
tachometer and speedometer.
Speedometer Adjustment This knob allows for the adjustment of the Computron's digital speedometer.
12-Volt Receptacle
This receptacle uses a standard cigarette lighter type adapter and can be used
to plug-in cellular phones, video cameras, etc.
&RPSXWURQ'LVSOD\0RGXOH )LJXUH
This module is located at the top center of the Echelon dash board and is the main display for the
Computron ATD system. The display module is broken into two separate sections.
Speed Control Graph This portion of the Computron display module is used to assist the driver in
maintaining desired skiing speeds. This display consists of three green lights in the
center surrounded by several red lights. Using the Computron's "Set Speed"
function, the driver is able to set a desired speed. If the speed of the boat is the
same as the set speed, the green lights will be illuminated. If the speed of the boat
is slower than the set speed, the red lights to the left of the green ones will begin to
light up. If the speed is faster than set speed the red lights to the right of the green
ones will be illuminated.
Function Display
The middle and bottom portions of the Computron display module is used to assist
the driver in displaying and setting the Computron's different functions. The
following sections will discuss the setting and use of the different functions of the
Computron ATD system.
&RPSXWURQ$7'2SHUDWLRQ
The Computron ATD system provides several valuable functions that provide additional benefits for
enjoyment of your new Malibu Boat. Complete control of the Computron ATD system is performed with the
use of only four buttons located on the center panel of the steering wheel.
Function Up
This button is used to scroll forward through the available functions of the
Computron ATD system. During the setting of certain functions, it is used to
increase the value of a setting.
Function Down
Set/Reset
This button is used to scroll backward through the available functions. During the
setting of certain functions, this button is used to decrease the value of a setting.
This button is used during certain operations to set or reset a setting for a particular
function.
Start/Stop
This button is only used to start and stop the digital stopwatch function.
23
| Categories | Malibu Manuals |
|---|---|
| Model Year | 1993, 1994, 1995, 1996 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4.5 out of 5)
Marine readers have rated Malibu Boats Operation and Maintenance Manual 4.5 out of 5.0 based on 2 product reviews. 4 stars...need info on how to operate a Malibu 20 footer.
nice manual